FREE PDF QUIZ HP - TRUSTABLE HPE7-A06 - TEST HPE CAMPUS ACCESS SWITCHING EXPERT WRITTEN EXAM SIMULATOR FEE

Free PDF Quiz HP - Trustable HPE7-A06 - Test HPE Campus Access Switching Expert Written Exam Simulator Fee

Free PDF Quiz HP - Trustable HPE7-A06 - Test HPE Campus Access Switching Expert Written Exam Simulator Fee

Blog Article

Tags: Test HPE7-A06 Simulator Fee, HPE7-A06 New Dumps Files, Valid HPE7-A06 Exam Pass4sure, Study HPE7-A06 Plan, HPE7-A06 Latest Exam Answers

To make sure you have all the practice you need, our HPE7-A06 practice test also includes numerous opportunities for you to put your skills to the HPE7-A06 test. Our HP HPE7-A06 practice exams simulate the real thing, so you can experience the pressure and environment of the actual HPE Campus Access Switching Expert Written Exam (HPE7-A06) test before the day arrives. You'll receive detailed feedback on your performance, so you know what areas to focus on and improve. At the TestPassed, we're committed to your success and believe in the effectiveness of our HPE7-A06 exam dumps.

The HP HPE7-A06 dumps are given regular update checks in case of any update. We make sure that candidates are not preparing for the HP HPE7-A06 exam from outdated and unreliable HPE7-A06 study material. TestPassed offers you a free demo version of the HP HPE7-A06 Dumps. This way candidates can easily check the validity and reliability of the HPE7-A06 exam products without having to spend time.

>> Test HPE7-A06 Simulator Fee <<

HPE7-A06 New Dumps Files - Valid HPE7-A06 Exam Pass4sure

The HP - HPE Campus Access Switching Expert Written Exam HPE7-A06 PDF file we have introduced is ideal for quick exam preparation. If you are working in a company, studying, or busy with your daily activities, our HP HPE7-A06 dumps PDF format is the best option for you. Since this format works on laptops, tablets, and smartphones, you can open it and read HP HPE7-A06 Questions without place and time restrictions.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q60-Q65):

NEW QUESTION # 60
A senior engineer from the network operations team has reported an intermittent problem where some PoE- powered devices are randomly losing power. During your investigation, you found that port 1 of the Acc-1 switch is currently presenting the behavior shown in the CLI output for the Acc-1.

What is a probablecausa lot poor 1/1/1 is denying PoE?

  • A. PoE port priority sot to low
  • B. switch PoE powerbudget exceeded
  • C. This switch does no! support PoE class 4.
  • D. PoE was manually disabled for port 1/1/1.

Answer: B

Explanation:
The question involves intermittent PoE-powered device power loss on port 1/1/1 of an AOS-CX switch (Acc-
1), with CLI output (not provided) indicating a PoE issue. The task is to identify a probable cause.
* Analysis of Options:
* Option A:Incorrect. AOS-CX switches typically support PoE Class 4 (802.3at, 30W), sufficient for most devices.
* Option B:Correct. If the switch's PoE power budget is exceeded, it may deny power to port 1/1
/1, causing intermittent device failures.
* Option C:Incorrect. Low PoE port priority may deprioritize the port but is less likely to cause complete power loss compared to budget issues.
* Option D:Incorrect. Manual disabling of PoE would cause consistent power loss, not intermittent issues.
* Why Option B is Correct:AOS-CX switches have a finite PoE power budget (e.g., 370W or 740W, depending on the model and power supply). If the total power demand from connected devices exceeds this budget, the switch denies power to some ports, often intermittently as devices cycle or negotiate power. For port 1/1/1, this could manifest as random power loss for the connected device. The CLI output likely shows a "power denied" status (e.g., via show power-over-ethernet brief). Checking the PoE budget (show power-over-ethernet) and upgrading power supplies or prioritizing critical ports resolves the issue, aligning with HPE Aruba Networking's PoE troubleshooting guidelines.
* Relevance to Certification Objectives:
* Connectivity (9%):Troubleshooting PoE deployment issues.
* Troubleshooting (10%):Diagnosing power-related issues in campus networks.
* Switching (19%):Implementing PoE configurations for Layer 2 devices.
References:
HPE Aruba Networking AOS-CX Configuration Guide: PoE Configuration and Troubleshooting.
HPE7-A06Study Guide: Covers PoE management and diagnostics.
HPE Aruba Networking Technical Documentation: PoE Budget Troubleshooting.


NEW QUESTION # 61
Refer to the exhibit which illustrates the current configuration of Router-1.

Clients of VLAN 10 require access to services hosted in the 10.1.100.0/24subnet. This 'equites one 01 more routes to be added to Rculer-1 that do not currently exist.
Which script would install a route from 10.2.10.0/24 to 10.1.100.0/24 on Router-1? A return path is not required as part of this answer.

  • A. there is no solution as Core-1 is not part of VRF service
  • B. ip route 0.0.0.0/0 10.255.101.11 vrf service
    ip route 10.1.100.0/24 1/1/1 vrf IoT-Medical
  • C. ip route 0.0.0.0/0 10.255.101.11 vrf service
    ip route 10.255.101.0/24 1/1/1 vrf IoT-Medical
    ip route 10.1.100.0/24 10.255.101.11 vrf IoT-Medical
  • D. ip route 0.0.0.0/0 10.255.101.11 vrf service
    ip route 10.1.100.0/24 1/1/1:10.255.101.11 vrf IoT-Medical

Answer: C

Explanation:
The goal is to add a static route on Router-1 to allow clients in VLAN 10 (subnet 10.2.10.0/24, presumably in VRF 'IoT-Medical' based on options) to reach services in the 10.1.100.0/24 subnet. The exhibit indicates interface 1/1/1 (IP 10.255.101.10/24) is in VRF 'service', and the likely next hop towards the destination is Core-1 at 10.255.101.11 (also implied to be reachable via VRF 'service'). This requires adding a route in the source VRF ('IoT-Medical') pointing towards the destination via the next hop in the 'service' VRF.
* Static Route Syntax (with VRF):ip route <destination_prefix> <next-hop-ip> [vrf <source-vrf>]
* Analysis of Options:
* A: Claims Core-1 isn't in VRF 'service', contradicting the likely setup.
* B: Uses unusual interface:ip syntax (1/1/1:10.255.101.11). Defines the route in VRF 'IoT- Medical'.
* C: Uses interface 1/1/1 as the next hop. This is less specific than using the IP address and relies on the interface being point-to-point or having proxy ARP enabled. Defines the route in VRF
'IoT-Medical'.
* D: ip route 10.1.100.0/24 10.255.101.11 vrf IoT-Medical. This uses the standard syntax to define a static route for the destination 10.1.100.0/24 via the next-hop IP 10.255.101.11 within the context of the IoT-Medical VRF. The successful function of this route depends on inter-VRF routing (route leaking) being configured between 'IoT-Medical' and 'service' VRFs, but the command itself correctly defines the desired static route.
* Conclusion:Option D provides the correct and standard command syntax to configure the required static route within the specified source VRF ('IoT-Medical').
References:AOS-CX IP Routing Guide (Static Routes), AOS-CX VRF Configuration Guide (Inter-VRF Routing). This relates to the "Routing" (16%) and "Connectivity" (9%) objectives.


NEW QUESTION # 62
Identify the required configuration steps to enable DHCP EndpointProfiling with HPE Aruba Networking ClearPass. (Not all will be used)

Answer:

Explanation:

Explanation:

To enable DHCP Endpoint Profiling, the switch needs to forward relevant DHCP packets from the client to the ClearPass server. The most common method is configuring the switch to act as a DHCP relay agent for the ClearPass server IP address on the client VLAN's Switched Virtual Interface (SVI).
In scenarios where port access control (like 802.1X or MAC Auth) is enabled, clients might need to send DHCP requestsbeforethey are fully authenticated. To allow this while maintaining security, a pre- authentication role with limited access (specifically allowing DHCP) can be applied to the port initially.
The logical sequence based on the provided steps, assuming a pre-authentication workflow is intended, is:
* Create the role:Define the pre-authentication role container and associate it with the appropriate initial VLAN if needed.
* Permit DHCP in the role:Apply an Access Control List (ACL) or policy to this role that permits the necessary DHCP traffic (UDP ports 67 and 68). The step provided only mentions UDP 67, which allows the client's initial Discover/Request packets towards the server/relay. (A complete solution requires allowing return traffic on UDP 68 as well).
* Apply the role:Configure the client-facing physical interface to use this pre-authentication role before the final role is assigned post-authentication.
* Configure DHCP Relay:Configure the ip helper-address <clearpass_ip> command on the client's VLAN SVI. This instructs the switch to forward the DHCP packets it receives from clients in that VLAN to the ClearPass server (in addition to forwarding them to the actual DHCP server). ClearPass receives these packets and extracts information for profiling.
This sequence ensures that even before full authentication, DHCP is permitted, and the necessary packets are relayed to ClearPass for profiling.
References:AOS-CX Security Guide (Port Access, Roles, AAA), AOS-CX IP Helper / DHCP Relay Guide, ClearPass Deployment Guides (Endpoint Profiling using DHCP). This relates to "Authentication
/Authorization" (9%), "Security" (10%), and "Switching" (19%).


NEW QUESTION # 63
Following HPE Aruba Networking best practice, dick where you implement loop protection.

Answer:

Explanation:


NEW QUESTION # 64
When trying to add a now access switch to the network, theswitch port at the aggregation switch is automatically disabled.
What needs to be done to fix this issue?

  • A. Disable spanning tree loop-guard at the interface level.
  • B. Disable spanning tree bpdu-guard at the interface level.
  • C. Disable spanning tree bpdu-tilter al the interface level.
  • D. Disable spanning tree root-guard at the interface level.

Answer: B

Explanation:
The issue involves a new access switch's port being automatically disabled when connected to an aggregation switch, likely due to a Spanning Tree Protocol (STP) protection mechanism.
* Analysis of Options:
* Option A (Disable bpdu-filter):BPDU filtering prevents BPDUs from being sent or processed, which could cause loops, not resolve the issue.
* Option B (Disable root-guard):Root guard prevents a port from becoming the root bridge but does not cause port disablement in this context.
* Option C (Disable loop-guard):Loop guard prevents alternate ports from becoming designated but is unrelated to port disablement.
* Option D:Correct. Disabling BPDU guard on the aggregation switch's interface prevents it from disabling the port when it receives BPDUs from the new access switch.
* Why Option D is Correct:BPDU guard is an STP feature that disables a port if it receives BPDUs, assuming an unauthorized device is connected. When a new access switch isconnected, it sends BPDUs as part of normal STP operation, triggering BPDU guard on the aggregation switch and disabling the port. Disabling BPDU guard on the aggregation switch's interface (e.g., no spanning-tree bpdu-guard) allows the access switch to participate in STP without being disabled, resolving the issue while maintaining network stability.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Involves troubleshooting STP mechanisms for fault tolerance.
* Troubleshooting (10%):Includes diagnosing and remediating STP-related issues in campus networks.
* Switching (19%):Covers Layer 2 technologies like STP and its protection features.
References:
HPE Aruba Networking AOS-CX Configuration Guide: Spanning Tree Configuration, detailing BPDU guard.
HPE7-A06Study Guide: Covers STP troubleshooting and protection mechanisms.
HPE Aruba Networking Technical Documentation: STP Best Practices, explaining BPDU guard behavior.


NEW QUESTION # 65
......

When you first contacted us with HPE7-A06 quiz torrent, you may be confused about our HPE7-A06 exam question and would like to learn more about our products to confirm our claims. We have a trial version for you to experience. If you encounter any questions about our HPE7-A06 learning materials during use, you can contact our staff and we will be happy to serve for you. Maybe you will ask if we will charge an extra service fee. We assure you that we are committed to providing you with guidance on HPE7-A06 Quiz torrent, but all services are free of charge. As for any of your suggestions, we will take it into consideration, and effectively improve our HPE7-A06 exam question to better meet the needs of clients. In the process of your study, we have always been behind you and are your solid backing. This will ensure that once you have any questions you can get help in a timely manner.

HPE7-A06 New Dumps Files: https://www.testpassed.com/HPE7-A06-still-valid-exam.html

HP Test HPE7-A06 Simulator Fee Q4: What does a PDF/Testing Engine Test File consist of, In the guidance of teaching syllabus as well as theory and practice, our HPE7-A06 training guide has achieved high-quality exam materials according to the tendency in the industry, HP Test HPE7-A06 Simulator Fee Please study these questions very well before you go to the exam otherwise you may lose marks, The PDF version is simply a portable document copy of HP HPE7-A06 Questions and Answer Product.

Process State Definition Form, All of them are in my printed HPE7-A06 portfolio and showcase a different genre, style, or technique, Q4: What does a PDF/Testing Engine Test File consist of?

In the guidance of teaching syllabus as well as theory and practice, our HPE7-A06 training guide has achieved high-quality exam materials according to the tendency in the industry.

HPE7-A06 free download dumps & HPE7-A06 passleader study torrent

Please study these questions very well before you go to the exam otherwise you may lose marks, The PDF version is simply a portable document copy of HP HPE7-A06 Questions and Answer Product.

Our system can send buyers HPE7-A06: HPE Campus Access Switching Expert Written Exam torrent automatically in the first time so that you can download fast.

Report this page